China Factory For Grp Door - 3D Inside Core – Beihai Fiberglass manufacturers and suppliers

Factory For Grp Door - 3D Inside Core – Beihai Fiberglass

short description:

Send email to us

Product Detail

Product Tags

Feedback (2)

We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for Fiberglass Exterior Doors, Fiber Glass Pots, Fiberglass Sheet For Gate, We are sincere and open. We look forward to your visit and establishing trustworthy and long-term standing relationship.

Factory For Grp Door - 3D Inside Core – Beihai Fiberglass Detail:

The 3D GRP inside core brush with glue,then fixed molding.Second put it in mould and foaming.The final product is 3D GRP foam concrete board.

Advantage
Solve the problem of traditional foam cement :strength low, fragile, easy to crack; greatly improve the pulls strength, compression, bending strength (tensile, compressive strength were more than 0.50MP).
With modified foaming formula, so that foam has better thermal insulation performance, lower water absorption.It is the most perfect building insulation class A1 incombustible material, same lifetime with building.
Standard width is 1300mm
Weight 1.5kg/m2
Mesh size: 9mm*9mm

Application
core (5)
How to brush resin on 3D fabric
1. Resin blending: normally use unsaturated resins and need to add curing agent (100g resin with 1-3g curing agent)
2. The ratio of resin to fabric is 1:1, for instance, 1000g fabric need 1000g resin.
3.Choosing the appropriate operating platform and the fabric needs to be waxed on the surface of the operating platform( for the purpose of demoulding)
4.Putting the fabric on the operating platform.
5.Because the fabric is wrapping in the paper tubes, the core pillars will inclined to one direction.
core (1)
6.We will use rolls to brush the resin along the inclined direction of the fabric so that the fabric fibers can be infiltrated.
core (2)
7.After the fabric fibers are fully infiltrated, we can pull the upper layer of the fabric in the opposite direction and keep the whole fabric upright.
core (3)
8.It can be used when it is completely cured.
core (4)

Product detail pictures:

Related Product Guide:

We not only will try our greatest to supply outstanding services to every shopper, but also are ready to receive any suggestion offered by our buyers for Factory For Grp Door - 3D Inside Core – Beihai Fiberglass , The product will supply to all over the world, such as: Hungary, Nigeria, Latvia, We have top engineers in these industries and an efficient team in the research. What is more, now we have our own archives mouths and markets in China at low cost. Therefore, we can meet different inquiries from different clients. Remember to find our website to check more information from our merchandise.

3d Fiber Glass Fabric